Are you ready to upgrade your electrical sockets to a 25mm double socket set? Installing a new socket set may seem daunting, but with the right guidance, it can be a straightforward process. Follow these 5 easy steps to successfully install your new 25mm double socket set.

Step 1: Turn Off the Power

Safety first! Before you begin any electrical work, make sure to turn off the power to the area where you will be installing the new socket set. This will prevent any accidents and ensure a smooth installation process.

Step 2: Remove the Old Socket

Once the power is off, carefully remove the old socket from the wall. Use a screwdriver to loosen the screws holding the socket in place. Take note of how the wires are connected to the old socket so you can easily reconnect them to the new one.

Step 3: Prepare the Wires

After removing the old socket, prepare the wires for the new 25mm double socket set. Strip the ends of the wires to expose a small amount of copper. Make sure the wires are clean and free of any debris to ensure a secure connection.

Step 4: Install the New Socket

Now it's time to install the new 25mm double socket set. Connect the wires to the corresponding terminals on the back of the socket. Double check that the connections are secure and tight to avoid any issues with the electrical connection.

Step 5: Secure the Socket in Place

Once the wires are connected, carefully place the new socket into the wall box. Use the screws provided with the socket set to secure it in place. Make sure the socket is level and flush with the wall for a professional finish.

There you have it! By following these 5 easy steps, you can successfully install a 25mm double socket set in your home. Remember to always prioritize safety when working with electricity and consult a professional if you are unsure about any step in the installation process.

Product link: https://sdtools.co.uk/collections/electrical-and-lighting/products/13a-double-wall-socket-2-gang-with-switches-25mm-pattress-back-box?_pos=3&_sid=877418b8a&_ss=r